# Open SourceMolecular Dynamics

### Sidebar

#### For Developers

exercises:2016_ethz_mmm:single_point_calculation

This is an old revision of the document!

# Computation of the Lennard Jones curve

In this exercise you will compute the Lennard-Jones energy curve for a system of two Krypton (Kr) atoms.
In Part I you find the instructions for computing the energy of two Kr atoms at a distance $r=4.00 Å$.
In Part II you find the instructions for getting the energy profile as a function of $r$.
Additonal parameters for Neon (Ne) and combination rules to obtain new parameters are provided in Part III and IV.

## Part I: Single Point (Energy) calculation

In this section a commented CP2K input example for a single point calculation is provided. Comments are added and signaled with '!'.

#### 1. Step

Save the following input to a file named energy.inp

energy.inp
&GLOBAL                  ! section to select the kind of calculation
RUN_TYPE ENERGY       ! select type of calculation. In this case: ENERGY (=Single point calculation)
&END GLOBAL
&FORCE_EVAL              ! section with parameters and system description
METHOD FIST            ! Molecular Mechanics method
&MM                    ! specification of MM parameters
&FORCEFIELD          ! parameters needed to describe the potential
&SPLINE
EMAX_SPLINE 10000    ! numeric parameter to ensure calculation stability. Should not be changed
&END
&NONBONDED       ! parameters for the non bonded interactions
&LENNARD-JONES ! Lennard-Jones parameters
atoms Kr Kr
EPSILON    [K_e] 164.56
SIGMA [angstrom]   3.601
RCUT  [angstrom]  25.0
&END LENNARD-JONES
&END NONBONDED
&CHARGE
ATOM Kr
CHARGE 0.0
&END CHARGE
&END FORCEFIELD
&POISSON              ! solver for non periodic calculations
PERIODIC NONE
&EWALD
EWALD_TYPE none
&END EWALD
&END POISSON
&END MM
&SUBSYS                 ! system description
&CELL
ABC [angstrom] 10 10 10
PERIODIC NONE
&END CELL
&COORD
UNIT angstrom
Kr  0 0 0
Kr  4 0 0
&END COORD
&END SUBSYS
&END FORCE_EVAL

#### 2. Step

Run CP2K with the following arguments:

$cp2k.popt -i energy.inp -o energy.out #### 3. Step Afterwards the file energy.out will look like this:  **** **** ****** ** PROGRAM STARTED AT 2014-01-20 11:32:08.142 ***** ** *** *** ** PROGRAM STARTED ON some_server.ethz.ch ** **** ****** PROGRAM STARTED BY you ***** ** ** ** ** PROGRAM PROCESS ID 24183 **** ** ******* ** PROGRAM STARTED IN /home/you/XERCISES ... some stufff ... ENERGY| Total FORCE_EVAL ( FIST ) energy (a.u.): 0.003617048870059 ... some other stuff ... **** **** ****** ** PROGRAM ENDED AT 2014-01-20 12:24:18.154 ***** ** *** *** ** PROGRAM RAN ON some_server.ethz.ch ** **** ****** PROGRAM RAN BY you ***** ** ** ** ** PROGRAM PROCESS ID 24993 **** ** ******* ** PROGRAM STOPPED IN /home/you/EXERCISES If you get the closing Banner you know that cp2k worked. The following line tells you the result: ENERGY| Total FORCE_EVAL ( FIST ) energy (a.u.): 0.003617048870059 This is the energy (in Hartree) for a system of 2 Kr atoms at distance$ r=4.00 Å$Note, that in the input-file EPSILON is given in units of Kelvin, whereas in the output the energy is printed in Hartree, which is the unit of energy in the system of atomic units (a.u.). To convert from Kelvin to Hartree you have to multiply with the Boltzmann constant$ k_\text{b} = 3.1668154 \cdot 10^{-6} \frac{E_\text{H}}{\text{K}} $. ## Part II: Computation of the LJ energy curve In this section a few scripts to get the LJ energy profiles are presented. #### 1. Step In order to get a good profile, a set of energy values as a function of the interatomic distance is needed. You can use the energy.inp input file and change the Kr coordinates in order to get different starting distances. The output file will be rewritten every time you run a calculation, unless you change its name. To do so: $ mv energy.out energy_dist4A.out
If you run multiple calculations, it is always good to keep track of what you have done by producing an input and an output for every distance you are planning to run.

For doing so:

$cp energy.inp energy_dist2A.inp  then edit the input file with the new coordinates (e.g. 2 Å). you can now run CP2K and produce the output file: $ cp2k.popt -i energy_dist2A.inp -o energy_dist2A.out

#### 2. Step

When you have tested a few distances, you can produce a table looking like:

Input file Distance (Å) Energy (Eh)
energy_dist1A.inp 1
energy_dist2A.inp 2
energy_dist3A.inp 3

This is the Lennard Jones energy curve for two Kr atoms. By using any plotting program you can now get a representation of the energy profile.

#### 3. Step

Here are reported the LJ parameters for Ne atoms. Those are to replace the Kr parameters in the input file, along with your Ne coordinates that have to replace the Kr coordinates. A new LJ curve for Ne atoms can be now generated.

         &NONBONDED
&LENNARD-JONES ! Lennard-Jones Ne parameters
atoms Ne Ne
EPSILON    [K_e] 36.831
SIGMA [angstrom]  2.775
RCUT  [angstrom] 25.0
&END LENNARD-JONES
&END NONBONDED
&CHARGE
ATOM Ne
CHARGE 0.0
&END CHARGE

#### 4. Step

Here are reported the combination rules for pairs unlike pairs, i.e. for pairs of non identical atoms.
Once generated the ε and σ parameters for the couple Kr/Ne, generate once more the LJ dissociation curve.
Compare the “mixed” curve to the two “pure” curves and report the position and depth of the minimum.

$$\sigma_{ij}= \sqrt{\sigma_i\sigma_j}$$
$$\epsilon_{ij}= \sqrt{\epsilon_i\epsilon_j}$$

Remember that you are running with two different atom types. For this reason some of the input sections MUST BE REPLICATED for the two kinds of atoms present
• The “ LENNARD-JONES ” section must be present for all the three possible couples: Kr-Kr, Ne-Ne and Ne-Kr. Example:
      &LENNARD-JONES ! Lennard-Jones parameters for Ar-Ar interaction
atoms Kr Kr
EPSILON    [K_e] 164.56
SIGMA [angstrom]  3.601
RCUT  [angstrom]  25.0
&END LENNARD-JONES
&LENNARD-JONES ! Lennard-Jones Ne-Ne parameters
atoms Ne Ne
EPSILON    [K_e] 36.831
SIGMA [angstrom]  2.775
RCUT  [angstrom] 25.0
&END LENNARD-JONES
&LENNARD-JONES ! Lennard-Jones parameters for Kr-Ne interaction
atoms Kr Ne
EPSILON    [K_e] YOUR EPSILON
SIGMA [angstrom]  YOUR SIGMA
RCUT  [angstrom]  25.0
&END LENNARD-JONES 
• The “ CHARGE ” section must be also duplicated:
         &CHARGE
ATOM Ne
CHARGE 0.0
&END CHARGE
&CHARGE
ATOM Kr
CHARGE 0.0
&END CHARGE


## Questions

• Sketch the LJ energy curve for the two set of parameters ($\sigma$ and $\epsilon$) provided.
• Report, for both curves, the minimum energy distance and the depth of the minimum.
• What are the major differences between the curves? How do they relate to the sets of parameters provided?
exercises/2016_ethz_mmm/single_point_calculation.1456401769.txt.gz · Last modified: 2016/02/25 12:02 by sclelia

### Page Tools 