User Tools

Site Tools


exercises:2017_ethz_mmm:alanine_dipeptide

Ramachandran plot for Alanine Dipeptide

TO USE THE FUNCTION LIBRARY (VERSION UP TO DATE) IN THE INTERACTIVE SHELL: you@eulerX ~$ module load courses mmm ; mmm-init

Alanine dipeptide is often studied in theoretical work because it is among the simplest systems to exhibit some of the important features common to biomolecules. It has more than one long-lived conformational state. The relevant angles are the dihedral angles of the backbone, commonly called Φ and Ψ (see figure). In the following scheme, light blue atoms are carbons, white ones are hydrogens, red are oxygens, and blue are nitrogens. So the torsional angle Φ is C-N-C-C and Ψ is N-C-C-N along the backbone.

A detailed study of this system (see 10.1073/pnas.100127697) shows the presence, in vacuum of two stable states:

The diagram represents the contour lines of the molecular energy as a function of the two dihedral angles. Contour lines are separated by 2 kcal/mol.

In this exercise you will obtain a simplified version of the above potential energy surface, obtained in a very similar way as in the paper. You will constrain the angles at fixed values using a strong harmonic potential, and optimize all other degrees of freedom. From this, a grid of energies will be built, and the energy diagram (Ramachandran plot) will be constructed.

Download the 2.2 exercise into your $HOME folder and unzip it.

you@eulerX ~$ wget http://www.cp2k.org/_media/exercises:2015_ethz_mmm:exercise_2.2.zip
you@eulerX ~$ unzip exercises:2015_ethz_mmm:exercise_2.2.zip
All files of this exercise ( input and scripts are all commented ) can be downloaded from the wiki: exercise_2.2.zip

Then go to the directory “exercise_2.2/”

you@eulerX ~$ cd exercise_2.2

The input file has a section concerning restrained optimization:

inp.templ
&FORCE_EVAL                             ! This section defines method for calculating energy and forces
  METHOD FIST                           ! Using Molecular Mechanics
  &MM
    &FORCEFIELD                         ! This section specifies forcefield parameters
      parm_file_name ace_ala_nme.pot
! This file contains force field parameters
      parmtype CHM                      ! forcefield parameters has CHARMM format
      &SPLINE           ! This section specifies parameters to set up the splines used
! in the nonboned interactions (both pair body potential and many body potential)
        EMAX_SPLINE 1.0                 ! Specify the maximum value of the potential up to which splines will be constructed
      &END
    &END FORCEFIELD
    &POISSON                            ! This section specifies parameters for the Poisson solver
      &EWALD                            ! This section specifies parameters for the EWALD summation method (for the electrostatics)
        EWALD_TYPE ewald                ! Standard non-fft based ewald method
        ALPHA .36
        GMAX 29                         ! Number of grid points
      &END EWALD
    &END POISSON
    &PRINT                              ! This section controls printing options
      &FF_INFO
      &END
      &FF_PARAMETER_FILE
      &END
    &END
  &END MM
  &SUBSYS                               ! This section defines the system
    &CELL                               !  Unit cell set up
      ABC 50.0 50.0 50.0                ! Lengths of the cell vectors A, B, and C
    &END CELL
    &COLVAR                             ! This section specifies collective varialbe
       &TORSION                         ! This section defines variable as torsion angle
         ATOMS 5 7 9 15                 ! Four atoms specify torsion angle
       &END
       &PRINT
       &END
    &END
    &COLVAR                             ! This section specifies collective varialbe
       &TORSION                         ! This section defines variable as torsion angle
         ATOMS 7 9 15 17                ! Four atoms specify torsion angle
       &END
       &PRINT
       &END
    &END
     &TOPOLOGY
      CONN_FILE_NAME ace_ala_nme.psf
! File which contains the connectivity information
      CONNECTIVITY psf                  ! Format of the connectivity file is PSF
      COORD_FILE_NAME ini.pdb
! File which contains atom's coordinates of the system
      COORDINATE PDB                    ! Coordinates are in the PDB format
      &DUMP_PDB                         ! This sections specifies the dumping of the PDB at the starting geometry
      &END
      &DUMP_PSF                         ! This sections specifies the dumping of the PSF connectivity
      &END
    &END TOPOLOGY
    &PRINT
      &TOPOLOGY_INFO
        AMBER_INFO
      &END
    &END
  &END SUBSYS
&END FORCE_EVAL
&GLOBAL                                 ! Section with general information regarding which kind of simu lation to perform an parameters for the whole PROGRAM
  PRINT_LEVEL LOW                       ! Global print level
  PROJECT ch                            ! Name of the project. This word will appear as part of a name of all ouput files (except main ouput file, specified with -o option)
  RUN_TYPE GEO_OPT                      ! Run type is a geometry optimization
&END GLOBAL
&MOTION                                 ! This section specifies a set of tool connected with the motion of the nuclei
 &CONSTRAINT                            ! Section specifying information regarding how to impose constraints on the system
  &COLLECTIVE
  INTERMOLECULAR T
    COLVAR 1                            ! Sequential number of the variable
    &RESTRAINT                          ! This section specifies how stong is the restraint
      K=5.0                             ! U(x)=K*(x-x0)^2
    &END
    TARGET [deg] _A1_                   ! _A1_ will be changed to the number by an external scritp
  &END
   &COLLECTIVE
  INTERMOLECULAR T
    COLVAR 2                            ! Sequential number of the variable
    &RESTRAINT                          ! This section specifies how stong is the restraint
      K=5.0                             ! U(x)=K*(x-x0)^2
    &END                                                                                  
    TARGET [deg] _A2_                   ! _A1_ will be changed to the number by an external scritp
  &END
 &END

 &PRINT                                 ! This section controls the printing properties during an optimization or MD run
   &TRAJECTORY
    FORMAT PDB                          ! Format of  the ouput trajectory is PDB
    ADD_LAST NUMERIC                    ! (Wiki) If the last iteration should be added, and if it should be marked symbolically (with l) or with the iteration number.Not every iteration level is able to identify the last iteration early enough to be able to output. When this keyword is activated all iteration levels are checked for the last iteration step.
    &EACH
     GEO_OPT 100                        ! Print one frame every 100 iteration
    &END
   &END
 &END
 &GEO_OPT                               ! This section specifies optimizer options
    OPTIMIZER BFGS                      ! Type of the optimizer
    MAX_ITER 5000                       ! Maximum number of optimization steps
    MAX_FORCE 0.005                     ! The value of maximal force
    RMS_FORCE 0.003                     ! The value of maximal force RMS
 &END
&END

At this point submit the job grid, first loading the module for cp2k version 2.5 entering

you@eulerX exercise_2.2$ module load cp2k
you@eulerX exercise_2.2$ bsub < grid_alanine

The file “a1a2ene” will contain three columns: the two constrained dihedral angles, and the corresponding energy. Using gnuplot, you can visualize the results

you@eulerX exercise_2.2$ gnuplot torsion.gnu
Changing into the directory Logs you fill find files of the kind opt.?.?.pdb . You can now verify that the target torsional angles have been reached. To this end you can either use the graphical program vmd (first, load the module with module load vmd) or the function m_pdbtorsion:
you@eulerX exercise_2.2/Logs$ m_pdbtorsion 5 7 9 15 ; m_pdbtorsion 7 9 15 17 

for the two dihedral Phi and Psi.

To clean the output and unnecessary files and do it again,

you@eulerX exercise_2.2$ ./cleanall
exercises/2017_ethz_mmm/alanine_dipeptide.txt · Last modified: 2020/08/21 10:15 by 127.0.0.1